| Certification Program Name: | 10 Gigabit LAN Phy Support |
| Certification Program ID: | 10615 |
| Certification Program Category: | Switch Interoperability |
| Description: | This verifies a devices ability to transmit data between multiple vendors 10 Gigabit interfaces. |
| Interpretation: | Devices earning this certification have demonstrated interoperability of a 10 Gigabit LAN Phy interface with all possible vendor combinations.
2007 Certified Product Set:
3Com Switch 4200G
3Com Switch 4500G
3Com Switch 5500G-EI
Alcatel-Lucent OmniSwitch 6850-P24X
Alcatel-Lucent OmniSwitch 9800
Cisco Catalyst 6509-E
Enterasys Matrix™ X
Extreme Summit X450a-24t
Extreme BlackDiamond 8806
Foundry FastIron Edge X424 Premium
Foundry FastIron SX 800
Foundry NetIron MLX-4
Foundry BigIron RX-4
Fujitsu XG700
Fujitsu XG2000
IBM Nortel 10Gb Uplink Ethernet Switch Module
IBM Nortel 10Gb Ethernet Switch Module
2004 Product Set:
3Com: SuperStack 3 Switch 3870
Cisco Systems: Catalyst
6509
Extreme: BlackDiamond 10808
Foundry: FastIron Edge
9604
Foundry: BigIron MG8
No vendors opted to participate in this test in 2003. |
| Product Applicability: | This test is a optional test for all vendors switches supporting this function evaluated during Switch Interoperability 2003/2004. |
| Testing Overview: | The Tolly Group will transmit traffic from 10 Gigabit Ethernet interfaces on each switch targeted across the 10 Gigabit Ethernet uplink to the remote 10 Gigabit Ethernet port. The Tolly Group will then validate successful forwarding of the traffic. The participants supporting the switches under test will configure a 10 Gigabit Ethernet link between the SUTs for forwarding of the traffic. Data will be generated via Smart Windows. TRAFFIC RATES WILL NOT BE RECORDED OR REPORTED |